Belgian strawberry harvesting robot to enter greenhouses next year

Belgian robot manufacturers have been working, in great secrecy, on a harvesting robots for three years, but now they can finally show us a prototype. The machine was demonstrated at the International Mechanisation and Demonstration Day at Research Centre, Hoogstraten.


A gripper picks the strawberry from below, twists it, breaks the stem and then places it in a punnet on a flatbed lorry. That is the basis of the harvesting robot that engineers of the Belgian bureau Octinion, have been working on. At the International Mechanisation and Demonstration Day in Hoogstraten, a prototype of the machine was revealed. “The approach of the machine is that it picks 70 per cent of the strawberries, and harvests a fruit every three seconds,” explains technical director Jan Anthonis. “This should result in the machine costing as much as a harvester.” The machine should harvest 24 kilograms per hour, compared to 12-20 kilograms for a human harvester. Furthermore, the robot can work 24 hours per day.
Harvesting from below and twisting sideways are important characteristics of the machine. “We discovered, in cooperation with the knowledge institutions, that harvesting is easier thanks to the sideways twist,” says Anthonis. “The strength of the stem is less when harvesting vertically. Moreover, it is quite similar to manual harvesting.” Only ripe fruits are now being harvested, but various ripeness stages can be added later with vision technology.

The harvesting robot has to be combined with the Dribble, another innovation of Octinion. This autonomously driven, flat platform works with its own GPS, based on a set of beacons. The Dribble will be ready for market introduction at the start of 2017, and Octinion is already pursuing a number of opportunities. The robot is the first to form the base of the autonomously driven platform of the harvesting robot.

In cooperation with Research Centre Hoogstraten, further testing is currently being done in using the Dribble for combating powdery mildew with UV lighting. There is also interest in using the Dribble for spraying in greenhouses.

Next year, the machine will be tested at Research Centre Hoogstraten and with several cultivators. The harvesting machine should be on the market in 2018.